Grove Wing

The Grove Wing for HelvePic32 is the first in a series of upcoming wings and shields for the HelvePic32 development board.


The Grove Wing can be connected to both sides of a HelvePic32 board and connects all the I/O Pins from the respective side to Grove connectors.


A jumper allows you to select the supply voltage for the Grove connectors between 3.3V and 5V. For most convenience there is a second row of header pins where you can solder either a female or a male header strip so that all pins are accessible from there too.


Note: The Grove Wing for HelvePic32 comes as soldering kit with all needed parts. Soldering is easy and done in less than 5 minutes.


  • Grove Wing PCB
  • 8x Grove connector
  • 1x 3-pin Header
  • 1x Jumper

3,00 €

  • leider ausverkauft